In short: TTSN is the total time since new of an airframe, engine or propeller. It’s carried forward entry by entry in the logbooks and drives inspections, overhauls and resale value, so one early mistake carries into every later entry.
What TTSN means
TTSN stands for total time since new: the time an airframe, engine or propeller has accumulated since it was built. You’ll also see TT (total time), TSN (time since new) and TSO or TSMOH (time since overhaul or major overhaul). An engine or propeller has its own TTSN, which differs from the airframe’s once it has been replaced.
What counts as time
In Canada, air time, for keeping technical records, is the time from the moment an aircraft leaves the surface until it comes into contact with the surface at the next point of landing (CAR 101.01). The pilot-in-command records the air time of each flight and the cumulative total air time in the journey log, daily, on completing each flight or series of flights (CARs, Schedule I, item 4). Flight time, from first moving under the aircraft’s own power to coming to rest, is a different, longer measure.
In the US, time in service, with respect to maintenance time records, is defined the same way: from the moment the aircraft leaves the surface of the earth until it touches it at the next point of landing (14 CFR 1.1). The owner’s records must show the total time in service of the airframe, each engine, each propeller and each rotor (14 CFR 91.417(a)(2)(i)).
Where is every flight hour recorded?
In Canada, every flight goes in the journey log: the pilot-in-command records the air time of each flight and the cumulative total air time, daily (CARs, Schedule I, item 4). The journey log is where the airframe’s running total, its TTSN, is kept flight by flight.
The airframe log, the airframe’s technical record, doesn’t list every flight. Each maintenance entry in it records the airframe’s total time when the work was done, so the TTSN there moves forward from one entry to the next. Most private aircraft in the US have no journey log; the owner’s records must still show the airframe’s total time in service (14 CFR 91.417(a)(2)(i)), often taken from the Hobbs or tach and written in the airframe logbook with each maintenance entry.
In AirTech Records Pro, each flight you log adds its time to the airframe TTSN, and the flight list shows the TTSN after every flight, with a link to the logbook page that records it.
Hobbs, tach and air time
Many aircraft have a meter, and the meters don’t agree. A Hobbs meter runs on clock time whenever it’s switched on, usually with the engine running or the master on, so it includes taxiing. A tachometer’s hour meter runs in proportion to engine speed, so it usually reads less than clock time. Neither is exactly air time.
Agree with your maintainer how your aircraft’s time is recorded, and use the same basis every time. Switching between meters is how totals drift.
Why it matters
- Inspections and maintenance due by hours, such as 100-hour inspections and oil changes.
- Engine and propeller overhaul timing, and the remaining life of life-limited parts.
- Recurring ADs and service bulletins with hourly intervals.
- Resale value: a buyer checks that the totals carry forward without breaks from page to page and volume to volume.
Keeping it accurate
- Start from the last total in your logbooks and note its date.
- Record every flight soon after landing.
- Use the same time basis every time.
- Compare your running total with the logbooks at each annual inspection.
- If you find an error, don’t overwrite it. In Canada, an entry is corrected by striking it out so it stays legible and writing the correct entry with the date and your name and signature (CAR 605.93(5)). Talk to your AME or A&P/IA before correcting maintenance entries.
TTSN in AirTech Records
When you add your aircraft, set Tracking since and the Starting airframe TTSN. On AirTech Records Pro, every flight you log, as air time, up and down times or out-off-on-in, adds to the airframe TTSN as soon as it’s saved. Correct a flight and the TTSN of it and every flight after it is worked out again. Components’ times and maintenance due by hours follow the airframe TTSN. See Flights and TTSN.
On every plan, AirTech reads the TTSN carried forward and the TTSN at the end of each scanned page, LogScope™ shows which totals your pages cover, and you can type a TTSN to find the page it’s on. See Logbook pages.
Sources
- CAR 101.01, Interpretation (air time, flight time)
- CARs Part VI, Subpart 5, Division IV, Schedule I: Journey log
- CAR 605.93, Technical records: general
- 14 CFR 1.1, General definitions (time in service)
- 14 CFR 91.417, Maintenance records
Regulations change. This guide is general information, not legal or maintenance advice: check the current text and ask your AME or A&P/IA about your aircraft.
More guides
How to track aircraft engine oil consumption
Record the oil you add before each flight, work out consumption per hour, and watch the trend so a change in your engine shows up early.
Aircraft records: what to keep and why
The maintenance records US aircraft owners must keep under 14 CFR 91.417, how long to keep them, what goes to the buyer, and how Canadian rules differ.
How to digitize your aircraft logbooks
A practical way to scan every aircraft logbook page with your phone, check the dates and total time on each page, find the gaps and keep the originals safe.
Keep it in AirTech Records
See logging flights and keeping the airframe TTSN in AirTech Records, and compare the free plan and AirTech Records Pro on AirTech Records pricing.
Start free
AirTech Records is free for your logbooks. AirTech Records Pro is $19.99 a month or $199.99 a year, and every account starts with a month of it, free. No credit card required.
