In short: A rising oil consumption trend is one of the earliest signs of engine wear. Record every quart you add along with the hours flown, work out quarts per hour between oil changes, and take any steady climb or sudden jump to your maintainer.
Why track it
One top-up tells you very little. Months of top-ups show whether consumption is steady, creeping up or jumping, which is exactly the conversation to have with your maintainer. A written history is also something a buyer will want to see.
Consumption often changes slowly, over dozens of hours, so it’s easy to miss from the cockpit. A new engine or freshly overhauled cylinders can use more oil while they break in, and an engine that’s been sitting may behave differently once it’s flying regularly again. Writing it down every time is what turns those impressions into numbers you can compare.
How to work it out
Divide the oil added since the last oil change by the hours flown since then. For example, 3 quarts added over 30 hours is 0.1 quarts an hour, or a quart every 10 hours.
Work it out over several flights, not one, so a single odd reading doesn’t mislead you. Compare the trend with the maximum consumption your engine manufacturer publishes for your engine, usually in the engine’s operator’s manual.
Make the numbers reliable
- Check the oil at the same point every time, such as before the first flight of the day, with the aircraft level.
- Top up to the same mark each time, so each addition reflects what the engine used.
- Record every addition, including oil added between flights.
- Note each oil change, since the count starts again from there.
- Use the same hours you log for the aircraft. See What is TTSN?.
What to watch for
- A gradual climb over many hours, even if you’re still under the manufacturer’s limit.
- A sudden jump from one oil change to the next.
- Fresh oil on the belly or inside the cowling.
Any of those is worth raising with your AME or A&P. Oil consumption is one piece of the picture, alongside oil analysis, compression and a borescope inspection.
Track it in AirTech Records Pro
- When you log a flight, enter the oil added before the flight, in quarts. On a twin, enter the left and right engines separately.
- The Maintenance tab’s Actions menu opens the oil consumption trend in a dialog: hours per quart for each oil-change interval.
- The dashboard’s oil change gauge shows the oil used per hour flown since the last oil change, worked out from the oil added and the hours logged.
- Make the oil change a recurring item by hours, months or both, such as every 50 hours or 4 months, whichever comes first, and link it to its engine. Sign it off when it’s done and the next one is planned for you.
The free AirTech Records iPhone app, coming soon to the App Store, logs flights with their oil added too. The dashboard shows the figure since the last oil change, so note it each time you change the oil if you want to compare one interval with the next.
See Flights and TTSN, Maintenance › Oil changes and pricing.
More guides
What is TTSN on an aircraft?
TTSN means total time since new. What it counts, how Canadian and US rules define the time, why Hobbs and tach readings differ, and how to keep it right.
Borescope inspections and Savvy Aviation
What a cylinder borescope inspection shows, Savvy Aviation’s 11-view protocol, and how to capture and send the images with BorescopeGuide and AirTech Records.
Aircraft records: what to keep and why
The maintenance records US aircraft owners must keep under 14 CFR 91.417, how long to keep them, what goes to the buyer, and how Canadian rules differ.
Keep it in AirTech Records
See recording oil added on every flight in AirTech Records, and compare the free plan and AirTech Records Pro on AirTech Records pricing.
Start free
AirTech Records is free for your logbooks. AirTech Records Pro is $19.99 a month or $199.99 a year, and every account starts with a month of it, free. No credit card required.
